Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
TCS 2 M12/M12
electro galvanized
Group: 1337
Part number 174224
Solid connection element for secure mounting of pipes, ducts, and devices on steel profiles such as I-beams, T-beams, U-beams, and angle beams.
Flexible alignment even on inclined beams when combined with the universal joint – for vertical installations.
Versatile use as a single fastener or for mounting crossbars and cantilevered structures.
FM Approval - Sikla Beam Clamps TCS
PDF (582 KB)
B | 25 mm |
L | 58 mm |
L2 | 29 mm |
H1 | 27.3 mm |
Ma | M12 |
Mi1 | M12 |
Mi2 | M12 |
-VX,perm. | 5,37 kN |
VX,perm. | 5,37 kN |
VY,perm. | 4,51 kN |
-VZ,perm. | 8,50 kN |
Primary element material | cast steel |
Connecting element material | steel |
Class | 8.8 |
Surface finish | electro galvanized (Fe//Zn) |
Corrosion protection class | C2 |
Tighten the clamping bolt of the Beam Clamp first by hand, then tighten down with a spanner according to the mounting structures. The hardened point of the clamping bolt will penetrate the comparatively soft material of the beam, ensuring a solid and highly secure connection. Tighten the locking nut for securing the installation.
Note: Respect relevant mounting instructions! For FM-construction use thread ≥ M10 only!
Certification
TCS 0 M8/M8 and TCS 2 M12/M16: Approved and accepted by VdS for use with stationary fire extinguishing systems.
TCS 0 M8/M10 and TCS 2 M12/M12: Approved and accepted by VdS and FM for use with stationary fire extinguishing systems.
For different application fields see documents.