Beam Clamp TCS 0/2

Group: 1337

This is a replacement for Old Productname (Part number 123456).

Massives Anschlusselement zur sicheren Montage von Rohrleitungen, Kanälen und Geräten an Stahlprofilen wie I-, T-, U- und Winkelträgern.

Flexible Ausrichtung auch an geneigten Trägern durch Kombination mit dem Universalgelenk – für senkrechte Installationen.

Vielseitig einsetzbar als Einzelbefestigung oder zur Montage von Traversen und auskragenden Konstruktionen.

Select a Type

Overview of Types
General Information
Installation

Overview of Types

Info	Type	Max. flange thickness	Thread connection	Weight	Quantity	Part number
	TCS 0 LC	18.00 mm	ø10	0.112 kg/pcs.	50 pcs.	156648

	TCS 0 M 8/M 8	22.00 mm	M8/M8	0.143 kg/pcs.	50 pcs.	178283

	TCS 0 M 8/M10	22.00 mm	M8/M10	0.14 kg/pcs.	50 pcs.	174206

	TCS 2 M12/M12	26.00 mm	M12/M12	0.292 kg/pcs.	25 pcs.	174224

	TCS 2 M12/M16	26.00 mm	M12/M16	0.277 kg/pcs.	25 pcs.	174215

Installation

Tighten the clamping bolt of the Beam Clamp first by hand, then tighten down with a spanner according to the mounting structures. The hardened point of the clamping bolt will penetrate the comparatively soft material of the beam, ensuring a solid and highly secure connection. Tighten the locking nut for securing the installation.

Note: Respect relevant mounting instructions! For FM-construction use thread ≥ M10 only!

Info	Type	Max. flange thickness	Thread connection	Weight	Quantity	Part number
	TCS 0 LC	18.00 mm	ø10	0.112 kg/pcs.	50 pcs.	156648

	TCS 0 M 8/M 8	22.00 mm	M8/M8	0.143 kg/pcs.	50 pcs.	178283

	TCS 0 M 8/M10	22.00 mm	M8/M10	0.14 kg/pcs.	50 pcs.	174206

	TCS 2 M12/M12	26.00 mm	M12/M12	0.292 kg/pcs.	25 pcs.	174224

	TCS 2 M12/M16	26.00 mm	M12/M16	0.277 kg/pcs.	25 pcs.	174215

General Information

Heavy-duty connection element which, in combination with grub screws (M8 up to M16), are suitable for mounting pipes, ducts and equipments to steel beams (I-, T-, U-and angle steel beams). The combination with a Universal Joint provides for vertically aligned attachment to inclined beams. Can serve as single mounting element for installing crossbars and for fixing cantilever structures.

Certification

Approved and accepted by VdS and FM for use with stationary fire extinguishing systems.

Technical specifications

Primary element material	cast steel
Connecting element material	steel
Surface finish	galvanisch verzinkt (Fe//Zn)
Corrosion protection class	C2

Load range

Type	-V_Z,perm.
TCS 0 LC	3,50 kN
TCS 0 M 8/M 8	3,50 kN
TCS 0 M 8/M10	3,50 kN
TCS 2 M12/M12	8,50 kN

The nominal loads indicated apply to new Beam Clamps fixed to undamaged beam flanges only.

Software

This product is available in the following software.