Product catalogue

24 out of 198 results

Filters

24 out of 198 results

HCP

Cantilever Bracket AK F100 HCP

5 Variants

Galvanised hollow-box-section with welded end-plate to serve as cantilever arm. May be used as a crossbar when combined with End Support STA and 4 x Self Forming Screw FLS. By means of the round holes in the base plate a direct connection to excisting cast-in channels is possible. With the types F 100-80 and F 100-80-E a combination of Beam Section F 100 with F 80/80 is possible.

HCP

Mounting Plate GPL F 80 HCP

4 Variants

Interface component to connect threaded bar M10 to M16 and threaded tube 1/2' siFramo TP F80 beam sections. The ST versions are solid and are only intended for pipe clamp fastening using threaded pipes.

electro galvanized

Pipe Clamp STABIL D-3G

42 Variants

For the installation of pipes required for all M&E services in industrial, residential and public buildings.

HCP

Pipe Clamp STABIL D-3G HCP

1 Variant

For the installation of pipes required for all M&E services in industrial, residential and public buildings.

electro galvanized

Pipe Clamp STABIL D-3G ME

42 Variants

For the installation of pipes required for all M&E services in industrial, residential and public buildings. Particularly suitable for soundproof pipe installation according to DIN 4109.

HCP

Pipe Clamp STABIL D-3G ME HCP

11 Variants

For soundproof installation of pipes required for all M&E services in industrial, residential and public buildings (as per DIN 4109). Suitable for ceiling, floor and wall mounting. The form-fitting rubber profile is additionally glued in place, making it completely secure and allowing the pipe to be rotated and slid without any problems during installation, without the rubber becoming jammed.

HCP

Beam Section TP F100 HCP

2 Variants

Galvanised box-section for fabrication of steel frames. Designed for both simple two-dimensional supports and complex volumetric arrangements. Holes are designed to receive Self Forming Screw FLS in conjunction with relevant components.

galvanized

Channel MS 41

3 Variants

Element for easily and efficiently pre-assembling crossbars, wall brackets and supporting structures on construction sites or in workshops.

HCP

Pipe Shoe LA-HV 150 HCP

9 Variants

Height-adjustable, single-clamp pipe shoe with a delivery height of 150 mm. Height adjustment in steps of 2.5 mm. Particularly suitable for sliding pipe supports on suitable surfaces. When resting on steel beams, a minimum flange width of 80 mm is recommended. Guide or fixed points can also be created in combination with other Sikla components.

electro galvanized

Adapter AD IG/IG

9 Variants

Adapter for additional connection options for all Sikla Pipe Clamps equipped with 3G triple thread nut, fixed points and threaded tubes. Adapter has internal threads on both sides.

HCP

Adapter Plate AP 46 HCP

1 Variant

Interface element to enable the connection of a Cantilever Bracket AK 46 or a WBD 46 to steel beams with beam flange widths of 80 to 120 mm.

HCP

Adapter Plate AP HCP

4 Variants

Interface element to enable the connection of standard endplates of Beam Brackets TKO F80 or F100, TKO 100 or 120 to primary steel with flange width >120 mm.

electro galvanized

Angle Connector CN CC41-90°

1 Variant

Pre-assembled connecting element for frame structures made of channels. Version W suitable for connections to wall, floor or ceiling. High-speed assembly system for 90°- and 45°-structures of Channels MS 41. Locks automatically by pushing down the bolt head and at the same time supports its own weight. Secure, form-locking, non-positive connection. Serrated speed nut with clamping bolt M10. Ideal shaping and high-strength material for high stiffness.

electro galvanized

Angle Connector CN CC41-90° W

1 Variant

HCP

Assembly Group BG MPK 46 HCP

4 Variants

HCP

Assembly Set MS 5P MA S HCP

2 Variants

The Assembly Set MS 5P is used to connect a Beam Bracket TKO, Angled Beam Bracket SKO, End Support WBD or Pivot Joint GE F to a beam section. The Stop Plate assists with professional installation.

HCP

Assembly Set MS 5P S HCP

3 Variants

Element for connecting Beam Bracket TKO, Angled Beam Bracket SKO, End Support WBD or Pivot Joint GE F to a beam section.

HCP

Beam Bracket TKO F 80 HCP

2 Variants

Galvanised hollow-box-section with welded end-plate to serve as cantilever arm. May be used as a crossbar when combined with End Support STA/End Support WBD and 4 x Self Forming Screw FLS.

HCP

Beam Bracket TKO F100 HCP

5 Variants

Galvanised hollow-box-section with welded end-plate to serve as cantilever arm. May be used as a crossbar when combined with End Support STA/End Support WBD and 4 x Self Forming Screw FLS.

electro galvanized

Beam Clamp TCS 0/2

5 Variants

Heavy-duty connection element which, in combination with grub screws (M8 up to M16), are suitable for mounting pipes, ducts and equipments to steel beams (I-, T-, U-and angle steel beams). The combination with a Universal Joint provides for vertically aligned attachment to inclined beams. Can serve as single mounting element for installing crossbars and for fixing cantilever structures.

electro galvanized

Beam Clamp TCS 1

2 Variants

Heavy-duty connection element which, in combination with grub screws (M8 up to M12), are suitable for mounting pipes, ducts and equipments to steel beams (I-, T-, U-and angle steel beams). The combination with a Universal Joint provides for vertically aligned attachment to inclined beams. Can serve as single mounting element for installing crossbars and for fixing cantilever structures. Due to their special base profile, Beam Clamps TCS 1 can also be slid along and retained in the opening of Sikla Channels of the 41 series.

electro galvanized

Beam Clamp TCS F

1 Variant

The TCS F Beam Clamp is a solid element designed for connecting pipes, ducts and other equipment to steel sections (UB, UC, PFC sections). A self-locking mechanism allows positioning by using one hand. The TCS F Beam Clamp can be used both for single drop rods and, in pairs, for trapezes.

HCP

Beam Clip SPA 5P AU HCP

2 Variants

Universal clamping element for all load bearing end plate and channel connections to existing steelwork without welding or drilling.

HCP

Beam Clip SPA 5P HCP

2 Variants

Universal clamping element for bi-lateral attachment of crossbars for pipe runs, ducts, cable lines and equipment to steel beams.