Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
HCP
HCP
HCP
HCP
Group: A630
Support plate for gratings used with Sikla components on steel beams
Closes the gap between base plate and cut-out grating to provide fall protection
Eliminates the need for welded upstands on the grating edge
The grating support is clamped to the steel beam together with the base plate of the Sikla component using the MS 5P mounting set. Subsequent assembly is possible. The grating support can be used on one or both sides and can be combined with all base plate sizes. The recesses for the screws of the assembly sets are matched to all beams widths and to the two sizes M12 and M16.
Assembly note: Turn hexagon head screw (screw head on top of the panel, thread downwards to avoid a tripping edge, see figure).
Info | Type | Weight | Quantity | Part number | |
| AG 80/310 - 160X360 HCP | 3,51 kg/pcs. | 1 pcs. | 802766 | ||
Support plate for gratings in combination with Sikla components on steel beams. The support plate is clamped to the steel beam and closes the gap between the base plate and the cut-out grating. This creates a fall protection device and eliminates the need for welded upstands on the grating edge.
Certification
Primary element material | steel |
Surface finish | HCP |
Corrosion protection class | C4 |
Type | -VZ,perm. |
AG 80/310 - 160X360 HCP | 5,50 kN |
Software
This product is available in the following software.
