Product catalogue

Used for installing crossbars between Channels MS 27 or building structures. Note: Each crossbar requires two T Brackets.

This T-Bracket serves as connecting element for cross bars between two channels. Note: For one cross bar always two T-Brackets should be used.

Suitable for Sikla Channels MS 27.

To be used with Channels MS 41 HCP.

To be used with Channels MS 41 ss.

To be used with Channels MS 41 HCP.

The Tension Tie Rod Disc IR can be used to fix an installation grid to the building structure. By means of the 3 Threaded Clevis GWB it is possible to create a y-suspension easily. Combined with the Clamping Set SPZ HCP the height adjustment of the installation grid becomes easy.

Threaded Clevis for construction of bracings and wind bracings e.g. in the system siFramo as tie rod to transfer loads/influences.

Used in combination with profiled beams as a holder for mounting crossbars composed of Sikla Channels or other standard profiles.

The threaded double nipple is used to securely connect two components with internal threads, such as pipes or fittings.

The threaded rod according to DIN 976 serves as a versatile connecting element for fastening and mounting in technical building equipment and plant engineering. It allows for flexible length adjustments and is often used in combination with pipe clamps, brackets or support systems.

The threaded rod according to DIN 976, HCP coated, serves as a versatile connecting element for fastening and mounting in technical building equipment and plant engineering. It allows for flexible length adjustments and is often used in combination with pipe clamps, brackets or support systems. The HCP version is suitable for special corrosion protection requirements.

The threaded rod according to DIN 976 serves as a versatile connecting element for fastening and mounting in technical building equipment and plant engineering. It allows for flexible length adjustments and is often used in combination with pipe clamps, brackets or support systems. Due to strength class 8.8 the Threaded Studs are suited for applications with bending loads (e.g. risers).

The threaded rod according to DIN 976 serves as a versatile connecting element for fastening and mounting in technical building equipment and plant engineering. It allows for flexible length adjustments and is often used in combination with pipe clamps, brackets or support systems. Made of stainless steel, making it suitable for special corrosion protection requirements.

To be used as a direct connection element between Mounting Plate and Pipe Clamp or a support rod in combination with Socket Angle or Universal Joints as angular support.

To be used as a direct connecting element between Mounting Plate ss and stainless steel pipe clamp or as a support rod in combination with Universal Joints.

To be used as a direct connecting element between Mounting Plate ss and stainless steel pipe clamp or as a support rod in combination with Universal Joints.

Necessary and time-saving element for horizontal or vertical constructions on the site. To be used as support and bracing of cantilever brackets or channel constructions.

Tie Rods cater for the lateral forces applied to Support Brackets. Such lateral forces always occur when pipes are laid, in particular when sliding elements are fixed onto Support Brackets, and fett must /fett be safely absorbed by means of Tie Rods fixed to the brackets. Otherwise the Support Brackets run the accute risk of being pulled out of their anchoring components by the forces exerted.

For fixing pipes up to a nominal diameter of NB50 directly to ceilings made of trapezoidal corrugated sheet according to VdS/FM standards or as single point mounting solution. In cases where VdS or FM regulations are not applicable or in cases of ventilation systems, larger loads may be fixed via crossbars and by an appropriate number of toggle studs. By turning the threaded rod, it is possible to make height adjustments. This threaded rod is secured and cannot be unscrewed completely. The Hypalon washer is weather-resistant and thus a crucial safety factor when sealing the mounting bore.

Flange screw with perfectly aligned properties for the constructional timber work, available in diameters 8 and 10 mm. Simple handling is secured due to ideal load transmission. The head dia. of type M8 is aligned to the slots of Channel 41. Thus for direct assembly through the elongated hole of the channel, a good load bearing capacity is secured. Type M10 can also be used at the edge of the channel for direct assembly into the elongated holes. The cutting notch allows direct screwing in without pre-drilling and allows a pinpoint locating. In addition, the tip avoids reliably the splitting of the battens behind. The high bearing of loads given by the flat head reduces the necessary fixing points. Especially for the fixing of roof hooks, an economical handling is assured.

The ABL HT spray is used to repair or embellish small areas of Sikla High-Temperature (HT) pipe shoe. It is a fast-drying, highly opaque special paint with excellent adhesion.

Twin Holder plates ensure a constant centre-to-centre distance between the flow and return pipes during installation.

U Bolt Fastening to connect standard U-Bolts required for pipework to the supporting Beam Sections, Cantilever Brackets and Beam Brackets F80 or F100.