Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
HCP
HCP
Group: 1814
Part number 186284
Particularly useful for installation in vertical channels or where access is difficult
Can be used in all Sikla Channels of 27 mm width, independent of the channel's height
HCP coating meets special corrosion protection requirements
Mi1 | M10 |
Channel Nut and Spring are tightely connected.
VX,perm. | 3,40 kN |
-VZ,perm. | 5,80 kN |
The permissible load capacities of the channels are to be respected.
Primary element material | steel |
Connecting element material | Spring steel, stainless |
Class | 5.6 |
Surface finish | HCP |
Corrosion protection class | C4 |
After inserting the Speed Nut into the channel opening, it is turned to the right as far as it will go by exerting slight pressure on it; deinstallation may be effected by following the instructions on the reverse order.
Installation and deinstallation do not require tools and may be repeated several times.
| M6 | M8 | M10 | M12 | |
|---|---|---|---|---|
| Tightening torque 8.8 [Nm] | 10 | 25 | 40 | 80 |
Using lower steel classes, the value are to be reduced accordingly.
Certification
