Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
Stainless Steel
Group: 1738
Part number 501414
Stainless steel anchor rod for pre-installation with Injection Systems VMU plus, VME plus and VMH
Suitable for anchoring in concrete or in brickwork only with VMU plus, with adjustable embedment depth
Designed for indoor and outdoor use
Sikla Anchor Injection Systems
PDF (8.81 MB)
Pre-assembled with washer and hexagon nut.
Detailed technical information see respective injection systems.
Primary element material | Stainless Steel A4 |
Class | A4-70 |
Corrosion protection class | CRC II – III (C4 – C5 acc. to DIN EN ISO 12944-2) |
1. Drill hole according to min. setting depth vertically to the surface.
2. Careful cleaning of drill hole with Steel brush and Blow-Out Pump.
3. Screw Mixing Nozzle onto the cartridge; foreshots to be removed and fill 2/3 of drill hole with resin starting from botton of the hole.
4. Drive the anchor manually into plastered borehole up to its embedment mark.
5. When reaching the embedment mark, plaster must be apparent.
6. Respect hardening time, when tighten the anchor with instructed torque.
Image: h(ef) + t(fix) = usable length of the threaded rod (without nut and washer)
Detailed assembly instruction is attached to the product.
Certification
Sikla Approval ETA-15/0270, ETA-17/0307
Approval ETA 17/0716, 19/0483