Pipe Clamp STABIL-D-2G ME FM 100-106

Group: 1281

Part number 808300

For secure installation of pipes in M&E services – robust and reliable.

Ideal for increased sound insulation requirements.

Complies with DIN 4109 and supports compliance with structural sound insulation requirements.

Technical Data

B₁	178 mm
b₂	38 mm
D	106 mm
D₂	106 mm
e	149 mm
M_a	M16
H	143,5 mm
M_i2	M10
t	3 mm

Sizes 14 to 115 mm are equipped with welded nuts for the clamping bolts. On the joint side, the clamping bolt is pre-assembled; the clamping bolt on the opposite side is mounted into the bore hole and retained by a plastic washer, thus preventing any accidental unscrewing. For sizes 124 and larger the clamping bolts and the required nuts are supplied in loose form.

Load range

-V_Z,perm.

2,00 kN

The recommended load is calculated using specific statistical methods relating to break load and is designed to restrict deflection to 1.5 mm or 2 % of the maximum applicable clamping diameter.

Technical specifications

Primary element material	steel
Isolating element material	SBR/EPDM
Connecting element material	steel
Surface finish	electro galvanized (Fe//Zn)
Corrosion protection class	C2

Installation

For further adapter-based connection options via the external thread of the 3G triple thread nut, see product "Adapter AD f/f" (this chapter).

For FM applications, at least M10 must be used.
For VdS applications > 2“ to 4”, at least M10 must be used.

Size [mm]	Tightening torque [Nm]
14 - 23	2
24 - 65	2
67 - 115	3
124 - 162	5
165 - 214	10
219 - 318	10

Certification

This product has been awared the RAL quality mark "pipe supports" and "fire-tested pipe supports" and is subject to continuous external monitoring according to RAL GZ-655.

FM Approval applies only to the following variants:

- STABIL D-3G in sizes from 29 to 115 mm with a production date up to 04/2026

- STABIL D-3G in sizes from 124 to 162 mm

- STABIL D-2G in all sizes