Go to your local Sikla page and discover offers for your country or sales region:

Country

Choose your country

Go to your local Sikla page and discover offers for your country or sales region:

Country

124 - 318 mm

electro galvanized

Pipe Clamp STABIL D-3G ME 148-154

Group: 1241

Part number 107413

For secure installation of pipes in M&E services – robust and reliable.

Ideal for increased sound insulation requirements.

Complies with DIN 4109 and supports compliance with structural sound insulation requirements.

Technical Data

Documents

Labels / RAL - Quality Label

Pipe Clamp Stabil D3G with Lining – RAL-GZ 655
PDF (203 KB)

Documents

Labels / RAL - Quality Label

Pipe Clamp Stabil D3G with Lining – RAL-GZ 655
PDF (203 KB)

B₁	235 mm
b₂	48 mm
D	154 mm
D₂	154 mm
e	206 mm
M_a	1/2"
H	200 mm
M_i1	M12
M_i2	M16
t	4 mm

Sizes 14 to 115 mm are equipped with welded nuts for the clamping bolts. On the joint side, the clamping bolt is pre-assembled; the clamping bolt on the opposite side is mounted into the bore hole and retained by a plastic washer, thus preventing any accidental unscrewing. For sizes 124 and larger the clamping bolts and the required nuts are supplied in loose form.

Load range

-V_Z,perm.

2,90 kN

Fire Resistance 30 min	2,22 kN
Fire Resistance 60 min	1,23 kN
Fire Resistance 90 min	0,73 kN
Fire Resistance 120 min	0,47 kN

The recommended load is calculated using specific statistical methods relating to break load and is designed to restrict deflection to 1.5 mm or 2 % of the maximum applicable clamping diameter.

Technical specifications

Primary element material	steel
Isolating element material	SBR/EPDM
Connecting element material	steel
Surface finish	electro galvanized (Fe//Zn)
Corrosion protection class	C2

Installation

For further adapter-based connection options via the external thread of the 3G triple thread nut, see product "Adapter AD f/f" (this chapter).

For FM applications, at least M10 must be used.
For VdS applications > 2“ to 4”, at least M10 must be used.

Size [mm]	Tightening torque [Nm]
14 - 23	2
24 - 65	2
67 - 115	3
124 - 162	5
165 - 214	10
219 - 318	10

Certification

This product has been awared the RAL quality mark "pipe supports" and "fire-tested pipe supports" and is subject to continuous external monitoring according to RAL GZ-655.

FM Approval applies only to the following variants:

- STABIL D-3G in sizes from 29 to 115 mm with a production date up to 04/2026

- STABIL D-3G in sizes from 124 to 162 mm

- STABIL D-2G in all sizes