31 - 129 mm
HCP
HCP
Pipe Clamp STABIL D-3G 25- 30 HCP
Group: 1844
Part number 112218
Installation of pipes required for all M&E services
Suitable for ceiling, floor and wall mounting.
Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
31 - 129 mm
HCP
HCP
Group: 1844
Part number 112218
Installation of pipes required for all M&E services
Suitable for ceiling, floor and wall mounting.
VdS Approval - Sikla Stabil D-3G wo/lining - G4920027
PDF (984 KB)
B1 | 69 mm |
b1 | 25 mm |
D | 30 mm |
D1 | 30 mm |
e | 48 mm |
H | 55,1 mm |
H3 | 17 mm |
Ma | M16 |
Mi1 | M8 |
Mi2 | M10 |
SA | slot with Philips, Form H |
SG | M6 |
SL | 22 mm |
t | 2 mm |
Sizes 15 to 129 mm are equipped with welded nuts for the clamping bolts. On the joint side, the clamping bolt is pre-assembled; the clamping bolt on the opposite side is mounted into the bore hole and retained by a plastic washer, thus preventing any accidental unscrewing.
With welded in 3G triple thread nut; without sound absorption lining. For further adapter-based connection options via the external thread of the 3G triple thread nut, see product 'Adapter AD f/f' (this chapter).
-VZ,perm. | 2,00 kN |
Primary element material | steel |
Connecting element material | steel |
Surface finish | HCP |
Corrosion protection class | C4 |
For FM applications, at least M10 must be used.
For VdS applications > 2“ to 4”, at least M10 must be used.
Tightening torques:
| Size range [mm] | Tightening torque [Nm] |
|---|---|
| 15 - 72 | 2 |
| 76 - 129 | 3 |
| 133 - 173 | 5 |
| 176 - 316 | 10 |
Certification
VdS-Approval No. G4920027, FM Approval for sizes between 31 and 173.