HCP
HCP
HCP
Insulated Foot Plate SHB F 80 HCP
Group: A440
Integrated footplate provide a solution for the support of building services
Permeable rubber compound mat to provides secure support and even load distribution
Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
HCP
HCP
HCP
Group: A440
Integrated footplate provide a solution for the support of building services
Permeable rubber compound mat to provides secure support and even load distribution
Assembly to Beam Section TP F 80 by means of 4 Self Forming Screws FLS F.
The system-related static friction must be determined on site. Depending on the roofing membrane used, the use of an additional separating layer is recommended. The load transfer into the structure must be checked on site.
Info | Type | Weight | Quantity | Part number | |
| SHB F 80 220 HCP | 5,65 kg/pcs. | 1 pcs. | 198926 | ||
Integrated footplate and permeable rubber compound mat to provide a solution for the support of building services, without the need for penetrative supports. In combination with the Sikla siFramo TP F 80 section, any frame structure may be built up from the footplates. Especially suitable for maintaining the thermal and waterproofing integrity of a roof or basement floor as no penetrative fixings are required to secure the footplates for service supports.
Certification
Fire Performance | Class B2 according to DIN 4102 |
Ultimate tensile strength | 0,40 N/mm² |
Tear resistance | 3,40 N/mm |
Elongation at break | 70 % |
Compression set | approx. 4.0 % measured 30 min. after release at 50 % compression / 23°C after 72 hours |
Primary element material | steel |
Isolating element material | SBR |
Surface finish | HCP |
Corrosion protection class | C4 |
Type | VZ,perm. |
SHB F 80 220 HCP | 34,60 kN |
Software
This product is available in the following software.
