High Temperature Pipe Shoe LC-HT-HV 200
Group: A767
Double-clamp, height-adjustable Pipe Shoe with a delivery height of 200 mm, height-adjustment in steps of 2.5mm - suitable for sliding pipe supports
Designed for use in temperatures up to 500°C, with material-dependent correction factors for load determination in accordance with DIN EN 13480-3.
Suitable for steel beams, with a minimum flange width of 80 mm
Overview of Types
General Information
Height-adjustable, double-clamp pipe shoe with a delivery height of 200 mm. Height adjustment in steps of 2.5 mm. Particularly suitable for sliding pipe supports on suitable surfaces. When resting on steel beams, a minimum flange width of 80 mm is recommended. Guide or fixed points can also be created in combination with other Sikla components. These pipe shoes are designed for use in the temperature range 300°C to 500°C. The material-dependent correction values k are used for determining the loads at real operating temperatures. To reach the expected temperatures, according to DIN EN 13480-3, Table 13.11.2–2 must be considered for the substructure.
Certification
Technical specifications
Salt spray test | Resistance > 500 hours |
Material base body | steel |
Material connecting element | Torque/Nut Height adjustment: A4-80, Torque/Nut Pipe Clamp: A4-70 |
Surface | HCP |
Corossion class | C4 |
Installation
| Type | Height H as delivered [mm] | Height H Range [mm] |
|---|---|---|
| HV 200 | 200 | 171 - 223,5 |
Tightening torque screw connections
| Clamping bolts | Tightening torque [Nm] | Height adjustment | Tightening torque [Nm] |
|---|---|---|---|
| DN 15 - 40 | 40 | Bolts in the bar | 80 |
| DN 50 - 200 | 50 | Bolts in the bar | 80 |