Ducting Clamp PLU 2G-N DN 112

Group: 1622

Part number 199664

Two-piece pipe clamp for simple installation of spiral-seam ducts.

Technical Data

B₁	158 mm
b₁	20 mm
D	120 mm
D₁	120 mm
e	141 mm
H	143 mm
M_i1	M8
M_i2	M10
t	1,5 mm

Clamping bolts are pre-mounted and retained. Pivot screw for safe and simple assembly with quick-set clip, suitable for 'single-hand' mounting. Easier handling and better storage possibilities due to optimized packaging.

Load range

-V_Z,perm.

0,80 kN

Technical specifications

Primary element material	steel
Connecting element material	steel
Surface finish	electro galvanized (Fe//Zn)
Corrosion protection class	C2

Installation

Tighten upper part of the pipe clamp without the interfering lower part. Hook the lower part, provided with a keyhole, into the fixed clamping bolt. After mounting of the pipe and locating into the pivot screw, the clamping bolt is fixed behind the bending; then tighten clamping bolt with max. 2 Nm.

Thread connection: M8/M10