Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
LKA-A 161/300
HCP
HCP
Group: A299
Part number 115837
Connecting Assembly Set for attachment to beam sections with a flange width 100-310mm
Basic element for the connection of the Rod Hanger Load Chain Assembly LKV in sizes M10 up to M16 rod and Pipe Clamps type Stabil Form C LK
1 Beam Section siFramo 80/30 (see length variants in table below) with pre-welded siFramo Eye-Plate HP F 80
2 U-Holders SB F 80/30-40
VZ,perm. | 11,30 kN |
The implementation and construction requirements of the components, their design as well as their verifications and load tests were carried out following the standards VGB R 510 L part I, KTA 3205.3 and DIN EN 13480-3.
Primary element material | steel |
Surface finish | HCP |
Corrosion protection class | C4 |
Connect the Beam Section siFramo 80/30 length with pre-welded siFramo Eye-Plate HP F 80 to the underside of the existing steel beam by means of the U-Holders SB F 80/30-40.
Tightening torque for the U-Holder clamps : 40 Nm
Type A: Load Chain runs crosswise to the beam
Type B: Load Chain runs longitudinally to the beam
Certification
