Beam Clamp TCS 3 - 17 HCP
Group: 1837
Part number 803084
Solid connecting element for mounting pipes, ducts and devices on steel profiles
Combination with Universal Joint enables vertical alignment on inclined beams
Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
Group: 1837
Part number 803084
Solid connecting element for mounting pipes, ducts and devices on steel profiles
Combination with Universal Joint enables vertical alignment on inclined beams
FM Approval - Sikla Beam Clamps TCS
PDF (582 KB)
B | 32 mm |
d | 17 mm |
H1 | 33,8 mm |
L | 54,5 mm |
L1 | 32,4 mm |
Ma | M12 |
-VZ,perm. | 15,00 kN |
The nominal loads indicated apply to new Beam Clamps fixed to undamaged beam flanges only.
Primary element material | steel |
Connecting element material | steel |
Surface finish | HCP |
Corrosion protection class | C4 |
Tighten the clamping bolt of the Beam Clamp first by hand, then tighten down with a spanner according to the mounting instructions. The hardened point of the clamping bolt will penetrate the comparatively soft material of the beam, ensuring a solid and highly secure connection. Tighten the locking nut for securing the installation.
Use an additional Holding Bracket HK 41 for mounting in the aera of the cutting edge of a channel.
Advice: Read relevant mounting instructions before installation!
Certification
Approved and accepted by FM for use with stationary fire extinguishing systems. For different application fields see documents.