Type MA
HCP
HCP
HCP
HCP
Assembly Set MS 5P MA M16 S HCP
Group: A640
Part number 114887
Used to connect a Beam Bracket TKO, Angled Beam Bracket SKO, End Support WBD or Pivot Joint GE F
Suitable for mounting on a beam section
Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
Type MA
HCP
HCP
HCP
HCP
Group: A640
Part number 114887
Used to connect a Beam Bracket TKO, Angled Beam Bracket SKO, End Support WBD or Pivot Joint GE F
Suitable for mounting on a beam section
Beam Clip SPA 5P AU - abZ Z-14.4-784
PDF (866 KB)
Static Guideline - siMotec
PDF (8.58 MB)
b | 17 mm |
d | 17 mm |
SG | M16 |
SL | 100 mm |
4 Beam Clips M16
4 Support plates M16
4 Stop plates M16
4 HR trimmings M16 x 100
HR trimming according EN 14399-3 consisting of: Hexagon bolt M16, 2 washers, 1 hexagon nut
-VY,perm. | 39,10 kN |
VY,perm. | 39,10 kN |
-VZ,perm. | 16,70 kN |
VZ,perm. | 16,70 kN |
The specified F(z) data relate to the worst case with flange thicknesses 30 mnm (M12) or 40 mm (M16) as well as a coefficient of adhesion µ(adhesion) = 0,20.
A possibly operating tensile force F(y) isn't included.
Primary element material | steel |
Surface finish | HCP |
Corrosion protection class | C4 |
1. Position stop plate on component to be mounted.
2. Position the Beam Clip with the slit side into the indentations of the stop plate and with the lug on the steel girder.
3. Install support plate and HR trimming and tighten accordingly.
The support plate secures a rectangular assembly of the bolt and prevents its shifting or bending stress. In conjunction with the HR trimming a continuous and predictable preload force is guaranteed. The stop plate ensures a tight fit of the Beam Clip.
Tightening torques:
| Type | Size range [mm] | Tightening torque MA [Nm] / plus revolution |
|---|---|---|
| M12 MA S | 1 - 30 | 60 / 90° |
| M16 MA S | 4 - 40 | 140 / 90° |
Certification
