Channel MS 41/21/1,5 2M

Group: 1111

Part number 173837

This is a replacement for Old Productname (Part number 123456).

Versatile mounting rail for technical building equipment and industrial plant engineering – ideal for crossbars, wall brackets and support frames.

Maximum flexibility during assembly thanks to internal teeth and compatibility with siConnect system components such as slide element 41, TCS 1, hook head screw HZ and all CC components.

Available in various designs, e.g. as a trapezoidal rail for higher load requirements – perfect for customised mounting solutions.

Technical Data
Installation

Technical Data

B	41 mm
H	21 mm
t	1.5 mm
l_z	24 mm

Load range

V_Z,perm.

2,00 kN

M_X,perm.

0,04 kNm

Elastic modulus Wy	0,70 cm³
Elastic modulus Wz	1,71 cm³
Second moment of area Iy	0,78 cm^4
Second Moment of Area Iz	3,50 cm^4
Radius of gyration iy	0,78 cm
Radius of gyration iz	1,65 cm

Torsional constant It	0,01 cm^4
Cross-sectional Area A	1,27 cm²

Technical specifications

Permissible stress σ{perm.}	185,00 N/mm²
Permissible yield strength f_y,perm.	285,00 N/mm²

Primary element material	steel
Surface finish	pre-galavanised
Corrosion protection class	C2

For further technical data, please refer to the pages in the download area.

Certification

This product has been awarded the RAL quality mark "Pipe Supports" and is subject to continuous external monitoring according to RAL GZ-655.

Installation

If required, channels can be joined on site using:

Slot pattern II: Hexagon socket bolt M8 x 16, with a max. spacing of 250 mm between connecting points one point at each end.

Slot pattern III and IV: Clamping Unit KL (for details see product.

All Channels MS 41 are serrated on the inner edges and thus can be combined with many other Sikla products, e.g. Channel Nut, End Support WBD, Beam Clamp TCS 1. Particularly effective combinations are possible using other Pressix components. All types can be used as guide and support channels by inserting Slide Block 41 inside the channel.