Product catalogue
24 out of 419 results
Filters
24 out of 419 results
Ducting Angle LUW A-Z
1 Variant
Mounting Angle for rectangular ducts installed directly under the ceiling, or for suspended installation when using a threaded rod.
Ducting Angle LUW ST
1 Variant
Mounting element for rectangular, particularly for vertically running ducts. In combination with Sound Absorber SDE 1 suitable for soundproof fixing of ducts according to DIN 4109.
Ducting Bracket LCO 20/30/40
1 Variant
For connecting formed duct parts. When tightening the Bracket, the flanges of the duct parts are pressed against each other. The ducting bracket is suitable for ducts with flange widths of 20 mm, 30 mm and 40 mm.
Ducting Clamp PLU 2G-N
1 Variant
Two-piece pipe clamp for simple installation of spiral-seam ducts.
Duo Clamp SRS 2G
21 Variants
Two-piece pipe clamp with double thread connection (M8/M10) for the installation of pipelines.
Duo Clamp SRS 2G mE
21 Variants
Two-piece pipe clamp with double thread connection (M8/M10) and sound absorption lining for the installation of pipelines. Applicable for sound-absorbed installations according to DIN 4109 specifications.
Duo Clamp SRS A4
12 Variants
Two-piece clamp with thread connection M8 or M10 for the installation of pipelines.
Duo Clamp SRS ME A4
17 Variants
Two-piece pipe clamp with thread connection M8 or M10 and sound absorption lining for the installation of pipelines.
End Cap ADK 27
4 Variants
End Cap for clean finish at the end of Sikla Channel MS 27.
End Cap ADK 41
8 Variants
End Cap for clean finish at the end of Sikla Channel MS. Double channels require 2 End Caps.
End Cap ADK 46
1 Variant
To be used for safely and neatly covering the ends of Profiles PRO 46.
End Cap ADK F 80
2 Variants
End Cap for a clean finish at the ends of the F 80 or 80/30beam sections, AKs and TKOs.
End Cap ADK F 80 SILVER
2 Variants
End Cap for a clean finish at the ends of the F 80 or 80/30beam sections, AKs and TKOs.
End Cap ADK F100
2 Variants
End Cap for a clean finish at the ends of the F 100 or 100/160 beam sections, AKs and TKOs.
End Cap ADK F100 SILVER
2 Variants
End Cap for a clean finish at the ends of the F 100 or 100/160 beam sections, AKs and TKOs.
End Support STA F 80 HCP
2 Variants
Plug-in component designed to create an endplate at the open end of a Beam Section TP F80 or a Cantilever bracket AK F80. By means of the round holes in the base plate a direct connection to excisting cast-in channels is possible.
End Support STA F100 HCP
3 Variants
Plug-in component designed to create an endplate at the open end of a Beam Section TP F 100 or a Cantilever bracket AK F 100. Variation types F 100-80 (E) are designed to combine F 100 with F 80 beam sections. Octagonal insert allows full utilisation of beam section within the space required by the End Support STA itself.
End Support STA-E F 80 45° HCP
1 Variant
The End Support STA F80-E 45° is designed to generate a 45° bracing element in combination with F80 beam sections or F80 Cantilever Brackets.
End Support STA-E F 80-E HCP
2 Variants
Plug-in component designed to create an endplate at the open end of a Beam Section TP F80 or a Cantilever bracket AK F80. By means of the round holes in the base plate a direct connection to excisting cast-in channels is possible.
End Support STA-E F100 -F 80 45° HCP
1 Variant
The End Support STA F 100-80-E 45° is designed to generate a 45° bracing element in combination with F100 Beam Sections or F100 Cantilever Brackets.
End Support STA-E F100 HCP
4 Variants
Plug-in component designed to create an endplate at the open end of a Beam Section TP F 100 or a Cantilever bracket AK F 100. Variation types F 100-80 (E) are designed to combine F 100 with F 80 beam sections. Octagonal insert allows full utilisation of beam section within the space required by the End Support STA itself.
End Support STA-Q F 80 HCP
1 Variant
Plug-in component designed to create an endplate at the open end of a Beam Section TP F 80 or TP F 80/30. A connection to Cantilever brackets AK F 80 or AK F 80/30 can also be realised e.g. for cable trays and downpipes.
End Support STA-Q F100 HCP
1 Variant
Plug-in component designed to create an endplate at the open end of a Beam Section TP F 100/160.
End Support WBD 41
12 Variants
In combination with a Sikla Channel MS 41, End Support WBD is particularly suitable for setting up support structures attached to walls, floors and ceilings as a base for frame structures made of Sikla Channels. The generous dimensions and the diamond shape of the mounting plate provide a high bending moment and safely stabilise lateral loads.