Slide Tube Clamp Ratio S-K

Group: 1235

This is a replacement for Old Productname (Part number 123456).

Select a Type

Overview of Types
General Information

Overview of Types

General Information

Two-piece clamp with quick-set clip and special lining for installing coated and uncoated plastic pipes of DIN and ANSI standard. No diffusion of plasticisers from the lining material into the plastic pipe. For ceiling, floor and wall mounting. Connections without adapter: M8, M10. Connections with Adapter (see this chapter): M12, M16, R 1/2', R 3/4' and R 1'. Up to size 110 equipped with spacers which allow sliding. To stop sliding, the spacers can be detached. For sliding installations from 4' on, we recommend the use of Pipe Clamp Stabil D-3G with Slide Set or Slide Element.

Certification

Technical specifications

Max. temperature	110 °C
Min. temperature	-50 °C

Fire Performance

B2 according to DIN 4102

Ultimate tensile strength

6,00 N/mm²

Elongation at break	450 %
Hardness	55+ / -5° Shore
Long-term performance	Weatherproof, ageing and ozone- resistant (DIN 53508 and DIN 53509)
Rebound elasticity	45 %

Primary element material	steel
Isolating element material	SBR/EPDM
Connecting element material	steel, PP
Surface finish	galvanisch verzinkt (Fe//Zn)
Corrosion protection class	C2

Load range

Type	-V_Z,perm.
RATIO S-K 16	0,65 kN
RATIO S-K 20	0,65 kN
RATIO S-K 25	0,65 kN
RATIO S-K 32	0,65 kN
RATIO S-K 40	0,65 kN
RATIO S-K 50	0,65 kN
RATIO S-K 56	0,65 kN
RATIO S-K 63	0,65 kN
RATIO S-K 75	0,65 kN
RATIO S-K 90	1,00 kN
RATIO S-K 110	1,20 kN

Software

This product is available in the following software.