TCS 1
Beam Clamp TCS 1 M10/M10 A4
Group: 1737
Part number 116568
Solid connecting element for mounting pipes, ducts and devices on steel profiles
Combination with Universal Joint ss enables vertical alignment on inclined beams
Login to see prices and availabilities
Technical Data
B | 33 mm |
B1 | 21.5 mm |
H1 | 26.2 mm |
L | 44 mm |
L2 | 23 mm |
Ma | M10 |
Mi1 | M10 |
Mi2 | M10 |
Pre-assembled with clamping bolt and locking nut.
Load range
-VZ,perm. | 5,00 kN |
The nominal loads indicated apply to new Beam Clamps fixed to undamaged beam flanges only.
Technical specifications
Primary element material | Stainless Steel A4 |
Corrosion protection class | CRC II – III (C4 – C5 acc. to DIN EN ISO 12944-2) |
Certification
Installation
Tighten the clamping bolt of the Beam Clamp first by hand, then tighten down with a spanner according to the mounting instructions. The hardened point of the clamping bolt will penetrate the comparatively soft material of the beam, ensuring a solid and highly secure connection. Tighten the locking nut for securing the installation.
Use an additional Holding Bracket HK 41 for mounting in the aera of the cutting edge of a channel.
Clamping range on parallel flange: 26 mm
Advice: Read relevant mounting instructions before installation!