Assembly Group BG22 F100 HCP

Group: 1101

Assembly group for fastening pipes without complex requirements and without heat insulation on SiFramo F 100 sections

Guided supports and fixed points can be created by adapting the supplied hexagon nuts

Supplied U Bolt fasteners vary depending on the required clamping range

Select a Type

Overview of Types

General Information

An Assembly Group for the fastening of pipes without complex requirements and without heat insulation on SiFramo F 100 sections. By adapting the hexagon nuts supplied, both guided supports and fixed points can be created. The U Bolt fasteners supplied vary depending on the required clamping range.

Certification

Technical specifications

Primary element material	steel
Sliding element material	PA 6.0
Connecting element material	steel
Surface finish	HCP
Corrosion protection class	C4

Software

This product is available in the following software.

Installation

The assembly of the individual components to form an Assembly Group is carried out during the course of pipe installation on the construction site. When used as a guided support, the nuts located both above and below the UB fastening must be tightened, enabling the pipe to freely move. In the case of permanent pipe connections, the permissible forces of the structural connection and bending forces of the bolt must not be exceeded.