The document lists slot patterns and measurements for Sikla siConnect channels. It includes dimensions for MS 27 and MS 41 profiles (single and double channels): width (B), height (H), thickness (t), edge distance (e), and slot pattern details (slot width b, slot length l, hole diameter d). Slot patterns vary by profile, with MS 41 series typically using 13 × 40 mm slots and MS 27 series using 8.5 × 18.5 mm slots. Larger profiles (e.g., 41-75/65/3.0) include Ø17 mm holes.

The documents provide comprehensive load and technical data for Sikla siConnect channels (MS 27 and MS 41 series). They include distributed load applications across spans from 20 cm to 600 cm, covering single and double channel configurations. All values account for channel slots and dead weight, calculated according to RAL-GZ 655-C, with limits of σ ≤ 185 N/mm² and f ≤ L/200. Technical specifications detail section modulus, moment of inertia, radius of gyration, cross-sectional area, and maximum point and torsional moments. Installation notes specify slot patterns and fasteners for short double-channel sections.

The documents summarize permissible loads and technical data for Sikla siConnect assembly channels. They cover MS 27 and MS 41 profiles, including single and double channels, with load tables for spans from 20 cm to 600 cm under centrical load application. All values consider channel slots and dead weight, calculated according to RAL-GZ 655-C, with limits of σ ≤ 185 N/mm² and f ≤ L/200. Technical data includes section modulus, moment of inertia, radius of gyration, cross-sectional area, and maximum point and torsional moments. Installation notes specify slot patterns and fasteners for short double-channel sections.

The document provides detailed technical specifications for the Channel MS 41 profiles. It includes dimensional data (width, height, thickness), section properties (section modulus, moment of inertia, radius of gyration), and mechanical performance values such as maximum point carrying capacity, torsional moment, and cross-sectional area. Both single and double channel configurations are covered, with notes on installation requirements for short sections. All values refer to slotted channels.

This document provides permissible load data for Channel MS 41-75/75/3.0 under centrical load application. It includes tables listing allowable loads (in Newtons) for span lengths from 20 cm up to 600 cm for both single and double channel configurations. The calculations consider channel slots and dead weight, based on RAL-GZ 655-C standards, with limits for stress (σ ≤ 185 N/mm²) and deflection (f ≤ L/200). Slot pattern IV is specified for installation.

This document provides permissible load data for Channel MS 41-75/65/3.0 under centrical load application. It includes tables listing allowable loads (in Newtons) for span lengths from 20 cm up to 600 cm for both single and double channel configurations. The calculations consider channel slots and dead weight, based on RAL-GZ 655-C standards, with limits for stress (σ ≤ 185 N/mm²) and deflection (f ≤ L/200). Slot pattern IV is specified for installation.

This document provides permissible load data for Channel MS 41/62/2.5 under centrical load application. It includes tables listing allowable loads (in Newtons) for span lengths from 20 cm up to 600 cm for both single and double channel configurations. The calculations consider channel slots and dead weight, based on RAL-GZ 655-C standards, with limits for stress (σ ≤ 185 N/mm²) and deflection (f ≤ L/200). Slot pattern III is specified for installation.

This document provides permissible load data for Channel MS 41/52/2.5 under centrical load application. It includes tables listing allowable loads (in Newtons) for span lengths from 20 cm up to 600 cm for both single and double channel configurations. The calculations consider channel slots and dead weight, based on RAL-GZ 655-C standards, with limits for stress (σ ≤ 185 N/mm²) and deflection (f ≤ L/200). Slot pattern III is specified for installation.

This document provides permissible load data for Channel MS 41/45/2.5 under centrical load application. It includes tables listing allowable loads (in Newtons) for span lengths from 20 cm up to 600 cm for both single and double channel configurations. The calculations consider channel slots and dead weight, based on RAL-GZ 655-C standards, with limits for stress (σ ≤ 185 N/mm²) and deflection (f ≤ L/200). Slot pattern III is specified for installation.

This document provides permissible load data for Channel MS 41/41/2.5 under centrical load application. It includes tables listing allowable loads (in Newtons) for span lengths from 20 cm up to 600 cm for both single and double channel configurations. The calculations consider channel slots and dead weight, based on RAL-GZ 655-C standards, with limits for stress (σ ≤ 185 N/mm²) and deflection (f ≤ L/200). Slot pattern III is specified for installation.

This document provides permissible load data for Channel MS 41/41/2.0 under centrical load application. It includes tables listing allowable loads (in Newtons) for span lengths from 20 cm up to 600 cm for both single and double channel configurations. The calculations consider channel slots and dead weight, based on RAL-GZ 655-C standards, with limits for stress (σ ≤ 185 N/mm²) and deflection (f ≤ L/200). Slot pattern III is specified for installation.

This document details permissible loads for Channel MS 41/31/2.0 under centrical load application. It provides a table of allowable loads (in Newtons) for span lengths from 20 cm to 500 cm. The calculations account for channel slots and dead weight, based on RAL-GZ 655-C standards, with limits for stress (σ ≤ 185 N/mm²) and deflection (f ≤ L/200). Slot pattern III is specified for installation.